The changeover from wet to dry coating reduces the costs of painting by many times as a result of circulating air mode:
➀ Use of water for over-spray separation is dispensed with
➁ Expensive paint sludge disposal as special waste is omitted
➂ Cost-intensive and time-intensive paint sludge extraction is not required
➃ Use of chemicals (coagulation agents, de-foaming agents and bactericides, etc.) is dispensed with
➄ Corrosion of spray booth equipment is reduced
➅ Maintenance costs are avoided without pump equipment
➆ Costs of cleaning the plant are reduced
➇ Economical supply and storage by disassembled boxes
Absorption capacity up to 100 kg/m2 and more depending on material in use, degree of separation → 97% with proper application and edrizzi® secondary filtering
Low-cost disposal of the dried paint (e. g. in the incineration plant), with no chemicals required
The noise level in the coating zone is reduced to a value
between 15 and 20 dB; no odours as a result of wet extraction
Easy conversion of existing systems; can be used for all surface materials; the system can be expanded and extended; wide range of variants of the edrizzi® secondary filter systems
Every surface treatment method is different. There are innumerable areas of application, which the edrizzi® team considers a challenge for system solutions and developments.